Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
+45 7671 0000    info@codeex.dk    www.codeex.dk
Tom Indkøbskurv

BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696

Forsiden Telefoni & Konference Mobiltelefontilbehør BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696
For at se vore priser skal du være oprettet som kunde: Er du allerede oprettet som kunde skal du logge ind.
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)
BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696 (511696)

BRODIT PASSIVE HOLDER WITH BALL JOINT - 511696

Related
Varenr.:
511696
EAN:
7320285116962
  • Type Bilholder
  • Color Sort
Beskrivelse

When keeping your smartphone in a passive holder, it is always within easy reach. A portable handsfree or a charging cable can be connected to the device when it is in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto a ProClip Mounting Platform.

INSTALLATION INSTRUCTIONS:
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

3. To place the device in the holder: Slide the device sideways into the holder.
To remove the device from the holder: Slide the device sideways and out from the holder.

4. The holder is in place.

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.